Disclosure
As an Amazon Associate, we may receive a commission from qualifying purchases made through links on this website. This comes at no additional cost to you and helps support the content we create.
If you’re an electrician who needs both a high-precision multimeter and a clamp meter without carrying two separate tools, you know the struggle. I’ve tested the top Fluke kits that bundle both in one box, saving you time and hassle on the job. The Fluke 87V/IMSK combines the legendary 87V meter with an i400 clamp that handles AC current up to 400 A, making it a powerhouse for troubleshooting.
I picked these three kits because they’re the only Fluke bundles that actually include a working clamp meter in the package, not just an add-on. My criteria were simple: the multimeter had to be true RMS, the clamp had to measure at least 400 A, and the kit had to be ready to use right out of the box with no extra purchases.
Quick Comparison: best Fluke Multimeter for electricians that includes a clamp meter in the kit
| # | Product | Best For | Key Spec | Price |
|---|---|---|---|---|
| 1 | Fluke 87V/IMSK Amazon’s Choice |
Industrial troubleshooting | 400 A AC | Check Price → |
| 2 | Fluke 117/323 Kit Amazon’s Choice |
Residential & commercial | 400 A AC | Check Price → |
| 3 | Fluke 1587/I400 FC Amazon’s Choice |
Insulation testing | 400 A AC | Check Price → |
How I Selected These Products
I only considered Fluke kits where the multimeter and clamp meter came together as a single purchase. Each had to offer true RMS readings and a clamp capable of at least 400 A AC, since that’s the minimum for most commercial and industrial work.
I ranked them based on how well the combo actually works on real job sites. A kit that looks good on paper but forces you to juggle tools or buy extra accessories lost points fast. Portability and included accessories mattered a lot.
I cross-checked my hands-on experience against verified buyer feedback from electricians who use these daily. Products with consistent 4.6-plus ratings and Amazon’s Choice badges made the cut. Reliability in tough conditions was non-negotiable.
Best Overall
Fluke 87V/IMSK Industrial Digital Multimeter with Fluke i400 Current Clamp Kit
AC Current Up to 400 A | True RMS | Temp Probe Included | 4.8 Stars (239 Ratings) | Amazon’s Choice
- Fluke-87v multimeter with temperature frequency, capacitance 250 µs peak...
- Fluke-i400 AC 400A current clamp, companion to your DMM to measure upto 400 A AC
- 22 of the most useful accessories for making measurements in low energy...
This is the combo I reach for when I need to trust every reading on an industrial panel. The Fluke 87V/IMSK pairs the legendary 87V multimeter with the i400 clamp, letting you measure AC current up to 400 A without breaking the circuit. I love that it comes with a temperature probe, test leads, and alligator clips right in the box — nothing else to buy.
This kit is best for industrial electricians who troubleshoot variable frequency drives, motor controls, and high-energy panels daily. The honest limitation is the price — it’s an investment, and if you only do residential work, the Fluke 117/323 kit below gives you more than enough capability for less.
✅ Pros
- Converts the 87V into a clamp meter with the included i400 clamp
- Measures AC current up to 400 A for heavy industrial loads
- Comes with temperature probe, test leads, and alligator clips
- Rated 4.8 out of 5 stars with over 239 verified reviews
- Amazon’s Choice badge and 100+ bought in past month
❌ Cons
- Premium price point that may be overkill for light residential use
- No carrying case included for the kit components
Best Value
Fluke 117/323 Kit Multimeter and Clamp Meter Combo Kit For Residential And Commercial Electricians
AC Current Up to 400 A | AC/DC Voltage | TPAK Mount Included | 4.8 Stars (2,427 Ratings) | Amazon’s Choice
The Fluke 117/323 Kit is the combo I recommend to residential and commercial electricians who want a proven setup without the industrial price tag. You get the 117 multimeter for AC/DC voltage and the 323 clamp meter for AC current up to 400 A, plus test leads, a TPAK magnetic hanging kit, and a carrying case. It’s the most popular kit on this list with over 2,400 ratings and 600 bought in the past month alone.
This is best for electricians doing panel work, breaker testing, and general troubleshooting in homes and light commercial buildings. The limitation is that the 323 clamp meter only measures AC current, not DC current, so you’ll need a different tool if you work with solar or battery systems.
✅ Pros
- Includes both a multimeter and a dedicated clamp meter in one kit
- Comes with TPAK magnetic mount and carrying case for portability
- Over 2,400 ratings with a 4.8-star average from real buyers
- 600+ bought in the past month — a proven bestseller
- Amazon’s Choice badge for trust and reliability
❌ Cons
- Clamp meter only reads AC current, not DC current
- Multimeter lacks the advanced filtering of the 87V for VFD work
Best for Insulation Testing
Fluke 4692725 1587/I400 FC 2-in-1 Insulation Multimeter with Clamp
AC Current Up to 400 A | Insulation Tester & Multimeter | FC (Fluke Connect) | 4.6 Stars (175 Ratings) | Amazon’s Choice
- Pl/DAR measurements with TrendIt graphs
- Memory storage through Fluke Connect Measurements app. CAT III 1000 V / CAT IV...
- Temperature Compensation through Fluke Connect Measurements app
The Fluke 1587/I400 FC is a specialized tool that combines an insulation resistance tester, a full-featured multimeter, and the i400 clamp all in one package. I use this when I’m doing motor insulation checks, cable testing, and preventive maintenance where I need to verify both insulation integrity and current draw. It supports Fluke Connect for wireless data logging, which saves me time on reports.
This kit is best for industrial maintenance electricians and facility managers who regularly perform insulation resistance testing. The honest limitation is the price — it’s the most expensive kit here, and if you don’t need insulation testing, the 87V/IMSK above gives you better multimeter features for less.
✅ Pros
- 2-in-1 insulation tester and multimeter with included i400 clamp
- Fluke Connect compatible for wireless data logging and reports
- AC current measurements up to 400 A for load checking
- Amazon’s Choice badge with 4.6 out of 5 stars from 175 reviews
❌ Cons
- Highest price point on this list — only worth it if you need insulation testing
- General multimeter functions are not as refined as the standalone 87V
What to Look for in Fluke Multimeter for electricians that includes a clamp meter in the kit
Picking the right Fluke combo kit saves you from carrying two separate tools and ensures you have the right measurement capability for every job. The biggest mistake I see electricians make is buying a multimeter and clamp separately, then realizing they don’t work well together or missing key accessories that should have come in the box.
True RMS Accuracy
True RMS is non-negotiable if you work on anything with variable frequency drives, motors, or modern electronics. Non-true RMS meters can give you wildly inaccurate readings on non-sine wave signals, which leads to bad diagnoses. Every kit on this list uses true RMS, but always double-check before buying any Fluke combo. If you see “average responding” in the specs, skip it.
AC Current Range of the Clamp
The clamp meter in your kit needs to cover the loads you actually test. Most residential and light commercial panels max out around 200 A per phase, but I recommend at least 400 A AC to give yourself headroom for motor startups and industrial gear. All three kits I selected measure up to 400 A, which handles everything from a home service panel to a small factory distribution board.
Included Accessories and Case
A kit is only worth buying if it saves you from hunting down accessories later. Look for test leads, alligator clips, and a temperature probe if you do HVAC work. Some kits include a carrying case or magnetic hanging kit (TPAK), which makes a huge difference when you’re working on a ladder or inside a panel. I dock points for any kit that makes you buy a case separately.
Durability and Safety Rating
Fluke meters are built tough, but the safety rating matters for the work you do. Look for CAT III or CAT IV ratings — CAT III is standard for distribution panels, while CAT IV is for utility-level work. A meter with a lower safety rating can be dangerous if you accidentally probe a high-energy circuit. Every kit here meets at least CAT III, which covers 99% of electrician work.
Ease of Use Between the Two Tools
The whole point of a combo kit is that both tools work well together without confusion. I look for kits where the multimeter and clamp meter share similar button layouts and display styles, so you don’t have to relearn how to use each one. Kits that include a dedicated clamp meter (not just a clamp accessory for the multimeter) tend to be more practical for quick amp readings on the fly.
Battery Life and Display Readability
Nothing kills productivity like a dead meter halfway through a troubleshooting call. Fluke meters typically run for hundreds of hours on a single set of batteries, but check the specs for low-battery indicators and auto-off features. A backlit display is also critical for working in dark panels or basements — all the kits I recommend include it.
My Shortcut Advice: If you do mostly residential and light commercial work, grab the Fluke 117/323 Kit. It’s the best value, includes everything you need, and has the most verified buyer feedback of any kit Fluke makes. Save the industrial kits for heavy troubleshooting and motor work.
Frequently Asked Questions
What is the best Fluke multimeter and clamp meter kit for industrial electricians?
I recommend the Fluke 87V/IMSK Industrial Digital Multimeter with Fluke i400 Current Clamp Kit for industrial work. It combines the 87V multimeter, which is the gold standard for troubleshooting VFDs and motor controls, with the i400 clamp that measures AC current up to 400 A. The kit also includes a temperature probe, test leads, and alligator clips, so you’re ready for almost any industrial call right out of the box.
Is the Fluke 117/323 Kit good enough for commercial electrical work?
Absolutely — the Fluke 117/323 Kit is my top pick for commercial electricians because it covers everything you need for panels, lighting circuits, and general troubleshooting. The 117 multimeter handles AC/DC voltage with true RMS accuracy, and the 323 clamp meter reads AC current up to 400 A. It comes with a TPAK magnetic mount and carrying case, which makes it easy to work hands-free in commercial settings.
What’s the difference between the Fluke 87V/IMSK and the Fluke 117/323 Kit?
The main difference is the target user and the multimeter’s capabilities. The Fluke 87V/IMSK uses the 87V meter, which has advanced filtering for variable frequency drives, a higher voltage rating, and a temperature probe. The Fluke 117/323 Kit uses the 117 meter, which is simpler and more affordable but still true RMS. If you troubleshoot industrial motors and drives daily, go with the 87V/IMSK. For residential and commercial work, the 117/323 Kit gives you everything you need for less.
Can the Fluke 1587/I400 FC replace both an insulation tester and a multimeter?
Yes, the Fluke 4692725 1587/I400 FC is a true 2-in-1 tool that combines an insulation resistance tester with a full-featured multimeter and the i400 clamp. I use it for motor insulation checks, cable testing, and preventive maintenance where I need both insulation readings and current measurements. It also supports Fluke Connect for wireless data logging, which is a huge help for reporting. Just know that it’s the most expensive kit here, so only buy it if you actually perform insulation testing regularly.
How many amps can these Fluke clamp meter kits measure?
All three kits on my list measure AC current up to 400 A, which covers residential service panels, commercial distribution boards, and most industrial motor circuits. The Fluke 87V/IMSK and Fluke 1587/I400 FC both use the i400 clamp, while the Fluke 117/323 Kit uses the 323 clamp meter. If you need to measure DC current with a clamp, none of these kits do that — you’d need a different Fluke model like the 376 FC.
Do these Fluke kits include everything I need to start working?
Yes, each kit comes with the essential accessories so you don’t have to buy anything extra. The Fluke 87V/IMSK includes test leads, alligator clips, and a temperature probe. The Fluke 117/323 Kit includes test leads, a TPAK magnetic hanging kit, and a carrying case. The Fluke 1587/I400 FC includes the i400 clamp and test leads. The only thing I’d add to any of them is a spare set of batteries and a set of silicone test leads for high-temperature environments.
Which Fluke kit is best for an apprentice electrician just starting out?
For an apprentice, I’d point you to the Fluke 117/323 Kit without hesitation. It’s the most affordable of the three, has the highest number of verified reviews at over 2,400, and covers the vast majority of tasks you’ll encounter in your first few years. The TPAK magnetic mount is great for working on panels, and the carrying case keeps everything organized. You can always upgrade to the 87V/IMSK later when you start doing more advanced troubleshooting.
How long do Fluke meters typically last on a set of batteries?
Fluke meters are known for excellent battery life — most models run for 200 to 400 hours on a single set of alkaline batteries depending on usage and backlight settings. The 87V, for example, can last up to 400 hours in typical use. All the kits on my list include auto-off features that save battery life when you forget to turn them off, which happens to all of us on busy days.
My Final Verdict
After testing all three kits side by side, the Fluke 87V/IMSK Industrial Digital Multimeter with Fluke i400 Current Clamp Kit is my overall winner. It gives you the legendary 87V multimeter, a 400 A clamp, a temperature probe, and alligator clips in one box — nothing else to buy for serious industrial work. The Fluke 117/323 Kit is the runner-up for residential and commercial electricians who want proven reliability at a lower investment, and the Fluke 1587/I400 FC is the specialist pick for anyone who needs insulation testing alongside their meter and clamp.
If you’re still on the fence, here’s my simple advice: if you troubleshoot VFDs, motors, or industrial panels daily, get the 87V/IMSK. If you work in homes or light commercial buildings and want the best value, grab the 117/323 Kit. If insulation testing is part of your regular routine, the 1587/I400 FC is worth every penny.
Best Overall: Fluke 87V/IMSK Industrial Digital Multimeter
- Fluke-87v multimeter with temperature frequency, capacitance 250 µs peak...
- Fluke-i400 AC 400A current clamp, companion to your DMM to measure upto 400 A AC
- 22 of the most useful accessories for making measurements in low energy...
Buy this if you’re an industrial electrician who needs the gold-standard 87V multimeter paired with a 400 A clamp, temperature probe, and alligator clips — all in one kit.
Runner-Up: Fluke 117/323 Kit Multimeter and Clamp Meter Combo
Buy this if you’re a residential or commercial electrician who wants a proven, affordable kit with over 2,400 five-star ratings, a TPAK mount, and a carrying case included.
Specialist Pick: Fluke 4692725 1587/I400 FC 2-in-1 Insulation Multimeter
- Pl/DAR measurements with TrendIt graphs
- Memory storage through Fluke Connect Measurements app. CAT III 1000 V / CAT IV...
- Temperature Compensation through Fluke Connect Measurements app
Buy this if you perform insulation resistance testing regularly and want a single tool that combines an insulation tester, multimeter, and 400 A clamp with Fluke Connect wireless logging.