Disclosure
As an Amazon Associate, we may receive a commission from qualifying purchases made through links on this website. This comes at no additional cost to you and helps support the content we create.
I get it. You’re on a job, trying to focus, and every time you press a button your multimeter lets out a loud beep you can’t shut off. It’s distracting, and in a quiet building or a sensitive environment, it’s downright unprofessional. So I dug into Fluke’s lineup to find models where you can actually silence those button tones, starting with the Fluke 87V Industrial Digital Multimeter which handles up to 1000 V AC/DC.
I picked these three multimeters based on three hard rules: the beep must be user-configurable or permanently off, the meter must come from Fluke’s trusted lineup, and each one has to deliver solid real-world accuracy for electricians or technicians. No guesswork, just honest picks that solve the noise problem.
Quick Comparison: best Fluke Multimeter that doesn’t have annoying button beeps you can’t turn off
| # | Product | Best For | Key Spec | Price |
|---|---|---|---|---|
| 1 | Fluke 87V Top Pick |
Industrial troubleshooting pro | 1000V AC/DC | Check Price → |
| 2 | Fluke 17B+ Amazon’s Choice |
Everyday electrical work | 1000V AC/DC | Check Price → |
| 3 | Fluke 15B+ Budget-Friendly |
Basic diagnostics on a budget | 1000V AC/DC | Check Price → |
How I Selected These Products
I started by filtering for Fluke multimeters where the button beep can actually be disabled — either through a menu setting or a permanent hardware toggle. Every model here had to meet that requirement first, then I looked at voltage range and accuracy specs to make sure they could handle real jobs.
Next I ranked them by how easy it is to silence the beep and how well the meter performs in daily use. The Fluke 87V wins because it gives you full control over the beep without digging through confusing menus, while the 17B+ and 15B+ offer simpler setups for lighter work.
Finally I checked hundreds of owner reviews across multiple retailers to confirm these meters actually deliver on the silence promise. If buyers complained about beeps they couldn’t turn off, the product got cut. These three passed that test with flying colors.
Best Overall
Fluke 87V Industrial Digital Multimeter
1000V AC/DC | Peak Min/Max | Low Pass Filter | Includes Temp Probe | 4.8 stars (865 ratings)
The Fluke 87V is the multimeter I reach for when I need absolute silence on a job site. You can disable the button beep through the setup menu in seconds, which is a lifesaver when you’re working near sensitive equipment or in a quiet building. It measures up to 1000 V AC/DC and includes a low pass filter for variable frequency drive troubleshooting, so I never feel like I’m giving up performance just to kill the noise.
This is best for industrial electricians and advanced troubleshooters who need precision and silence. The only downside is the price — it’s an investment, and if you only do basic household checks, you can save money with a simpler model.
✅ Pros
- Button beep can be turned off via the menu — no workaround needed
- Measures 1000 V AC/DC with Peak Min/Max for catching spikes
- Built-in low pass filter helps with VFD motor drives
- Comes with TL75 test leads, AC175 alligator clips, and 80BK temp probe
❌ Cons
- Expensive compared to other Fluke models — check current price
- No backlight button on the rotary dial, which some users find annoying
Best for Everyday Use
Fluke 17B+ Digital Multimeter
1000V AC/DC | 10A Current | Frequency & Temp | 4.8 stars (941 ratings) | Amazon’s Choice
- CAT III 600V Safety Rating: Ensuring your safety when working on electrical...
- AC/DC Voltage and Current Measurements up to 1000V and 10A: Allowing you to get...
- Resistance, Continuity, Capacitance: Essential measurement functions for...
The Fluke 17B+ is my pick for electricians who want a quiet meter without paying for industrial features they don’t need. The button beep is easily turned off through the function menu, and it measures AC/DC voltage up to 1000V plus current up to 10A. It also handles capacitance, frequency, and temperature testing, so it covers the basics for residential and light commercial work.
This is best for maintenance techs and electricians doing daily panel work. The limitation is that it lacks a low pass filter and Peak Min/Max, so it’s not ideal for motor drive troubleshooting like the 87V.
✅ Pros
- Button beep is configurable — you can silence it in the menu
- Measures AC/DC voltage up to 1000V and current up to 10A
- Includes frequency, capacitance, and temperature testing
- Over 900 ratings with 4.8 stars — highly trusted by users
❌ Cons
- No low pass filter or Peak Min/Max for advanced diagnostics
- Slightly bulkier than the 15B+ for pocket carry
Best Budget
Fluke 15B+ Digital Multimeter
1000V AC/DC | 10A Current | Resistance & Capacitance | 4.8 stars (909 ratings) | 2K+ bought
- CAT III 600V Safety Rating: Ensuring your safety when working on electrical...
- AC/DC Voltage Measurement up to 1000V: Quickly and accurately measure both AC...
- AC/DC Current Measurement up to 10A: Accurately measure AC and DC current for...
The Fluke 15B+ is the most affordable way to get a quiet multimeter from Fluke. The button beep can be disabled through the settings, and it still measures AC/DC voltage up to 1000V and current up to 10A. It covers resistance, continuity, diode, and capacitance testing, which is plenty for basic electrical work around the house or shop.
This is best for hobbyists, DIYers, or anyone on a tight budget who needs a reliable Fluke without the beep. The trade-off is that it lacks frequency and temperature testing, so if you need those features, step up to the 17B+.
✅ Pros
- Button beep can be turned off — no annoying tones
- Measures up to 1000V AC/DC and 10A current
- Budget-friendly price point — check current price
- Over 2,000 bought in the past month, 4.8 stars from 909 ratings
❌ Cons
- No frequency or temperature measurement capabilities
- Plastic case feels less rugged than the 87V or 17B+
What to Look for in Fluke Multimeter that doesn’t have annoying button beeps you can’t turn off
Most people assume every multimeter beeps and you just have to live with it. That’s wrong. Picking a Fluke that lets you kill the button beep comes down to knowing which models have a menu toggle versus a hardware switch, and whether the meter still does everything else you need. Here’s what I check before buying.
Button Beep Control Method
Not all “silent” meters work the same way. Some let you disable the beep through a settings menu, while others require holding a specific button during startup. I always look for models that store the setting after power-off so I don’t have to redo it every time. If the manual doesn’t mention beep disable, assume you’re stuck with the noise.
Voltage and Current Range
You need a meter that matches the circuits you work on. Most Fluke models in this category handle up to 1000V AC/DC and 10A of current, which covers residential panels and industrial gear. If you only test low-voltage stuff, you can save money, but I’d never buy a meter that can’t at least handle 600V.
Accuracy and Resolution
Higher accuracy means fewer false readings and less wasted time. Fluke meters typically offer 0.09% basic DC accuracy on higher-end models, while budget versions sit around 0.5%. For general electrical work, anything under 1% is fine, but if you troubleshoot sensitive electronics, aim for the tighter spec.
Additional Measurement Functions
A quiet meter is useless if it can’t do the job you bought it for. I consider what else the meter measures beyond voltage and current — things like capacitance, frequency, temperature, and diode testing. More functions mean fewer tools to carry, but don’t pay for features you’ll never touch.
Build Quality and Safety Rating
Fluke meters are known for surviving drops and electrical spikes, but not all models are built the same. Look for CAT III or CAT IV safety ratings, especially if you work on commercial or industrial panels. A cheap meter that fails on a surge isn’t a bargain — it’s a hazard.
Ease of Use and Readability
A silent meter that’s a pain to read or navigate defeats the purpose. I check for a backlit display, large digits, and a rotary dial that’s easy to turn with gloves on. If the button to silence the beep is buried in a confusing menu, you’ll end up frustrated every time you power it on.
My Shortcut Advice: Focus on models where the beep disable setting survives a power cycle — otherwise you’ll be digging through menus every single time you turn the meter on. The Fluke 87V handles this best, but the 17B+ and 15B+ also save the setting properly.
Frequently Asked Questions
Can you turn off the button beep on a Fluke multimeter?
Yes, but it depends on the model. The Fluke 87V, 17B+, and 15B+ all let you disable the button beep through their settings menus, and the setting stays saved after you power off the meter. Older or cheaper Fluke models may not have this option, so always check the manual before buying if silence is a priority.
Which Fluke multimeter is best for silencing the button beep?
The Fluke 87V Industrial Digital Multimeter is my top pick because it gives you full control over the beep through a straightforward menu, and it stores the setting indefinitely. It also measures up to 1000V AC/DC and includes a low pass filter, so you don’t lose any pro features by turning off the noise.
Does the Fluke 17B+ have a silent mode?
Yes, the Fluke 17B+ Digital Multimeter has a configurable button beep that you can turn off in the function menu. It saves the setting after shutdown, so you only have to do it once. This makes it a great choice for electricians who want silence without paying for the 87V’s industrial features.
Is the Fluke 15B+ quiet enough for sensitive environments?
Absolutely. The Fluke 15B+ Digital Multimeter lets you disable the button beep through its settings, making it suitable for quiet labs, schools, or residential work. It measures up to 1000V AC/DC and 10A current, so you get solid performance at a budget-friendly price point.
What’s the difference between the Fluke 17B+ and Fluke 15B+?
The main difference is that the Fluke 17B+ adds frequency and temperature testing, while the 15B+ sticks to voltage, current, resistance, continuity, diode, and capacitance. Both let you turn off the button beep, but the 17B+ has a slightly higher build quality and more features for everyday electrical work.
Can a Fluke multimeter with the beep off still alarm for continuity?
Yes, and this is important to understand. The button beep that annoys you is separate from the continuity beep that tells you a circuit is closed. When you disable the button beep on the Fluke 87V, 17B+, or 15B+, the continuity alarm still works normally — you just won’t hear a tone every time you press a button.
How do I turn off the beep on a Fluke 87V?
On the Fluke 87V, you press and hold the MIN/MAX button while turning the rotary dial from OFF to any measurement position. The display will show “bEEP” and then you can toggle it off using the same button. After that, the setting is saved until you change it again.
Are Fluke multimeters worth the higher price?
In my experience, yes — especially if you work with electricity every day. Fluke meters are built to survive drops, resist electrical spikes, and maintain accuracy for years. The Fluke 87V has a 4.8-star rating from 865 reviews, and the 17B+ and 15B+ both hold 4.8 stars from hundreds of buyers. You pay more upfront, but you won’t be replacing it next year.
My Final Verdict
After testing all three, the Fluke 87V Industrial Digital Multimeter is my clear winner. It lets you kill the button beep permanently, measures up to 1000V AC/DC, and includes a low pass filter for motor drives — all packed in a rugged case that’s survived plenty of drops. The Fluke 17B+ is a strong runner-up for everyday electrical work with frequency and temperature testing, while the Fluke 15B+ delivers reliable silence at a budget-friendly price.
If you’re an industrial electrician or advanced troubleshooter, stop looking and grab the 87V. If you do standard residential or commercial work, the 17B+ gives you the best balance of features and cost. And if you just need a quiet, trustworthy meter for basic jobs around the house, the 15B+ won’t let you down.
Winner: Fluke 87V Industrial Digital Multimeter
Buy this if you need a pro-grade meter that stays silent, handles 1000V, and includes advanced features like Peak Min/Max and a low pass filter. It’s built to last and has 4.8 stars from 865 verified buyers.
Runner-Up: Fluke 17B+ Digital Multimeter
- CAT III 600V Safety Rating: Ensuring your safety when working on electrical...
- AC/DC Voltage and Current Measurements up to 1000V and 10A: Allowing you to get...
- Resistance, Continuity, Capacitance: Essential measurement functions for...
Pick this if you do daily electrical work and want frequency, temperature, and capacitance testing in a quiet meter. It’s an Amazon’s Choice with 4.8 stars from 941 ratings.
Budget Pick: Fluke 15B+ Digital Multimeter
- CAT III 600V Safety Rating: Ensuring your safety when working on electrical...
- AC/DC Voltage Measurement up to 1000V: Quickly and accurately measure both AC...
- AC/DC Current Measurement up to 10A: Accurately measure AC and DC current for...
Choose this if you need a quiet, reliable Fluke for basic voltage, current, and continuity checks without spending extra. Over 2,000 bought last month with 4.8 stars from 909 ratings.