Emma Siddall

We’ve all been there — you finally get that new ANENG multimeter, and the QR code on the box is smudged or torn. You might wonder if the whole app experience is ruined before you even start testing circuits. The good news is that a broken QR code doesn’t lock you out of the app’s … Read more

You just unboxed your new ANENG multimeter, plugged in the leads, and the screen stays blank or reads zero. It’s frustrating, and you’re probably wondering if you got a defective unit or if you’re doing something wrong. Most of the time, the problem isn’t the meter itself—it’s the test leads, the battery, or the way … Read more

Remote commands not working on your ANENG multimeter can feel like a dead end, especially when you depend on data logging for your projects. It often comes down to a simple connection or setting issue that you can fix yourself in minutes. Many ANENG models require a specific USB-to-serial driver that Windows doesn’t install automatically. … Read more

I remember unboxing my first ANENG multimeter and immediately noticing the bare plastic casing. There was no thick rubber boot like I’d seen on other brands, and I wondered if I’d bought a cheap knockoff. After some digging, I learned that ANENG deliberately skips the shock-absorbing cover to keep costs low and the tool compact. … Read more

We’ve all been there—fumbling in a dark corner with a multimeter that just won’t light up. The long press trick is common on ANENG meters, but it doesn’t always work on every model. Most ANENG models like the AN8008 or DM101 actually have a dedicated backlight button that works with a simple short tap. Check … Read more

When you’re testing a resistor or tracing a circuit, a shaky reading on your ANENG multimeter can be frustrating. You need accurate numbers to diagnose problems correctly, and imprecise readings can send you down the wrong path entirely. In my experience, the biggest culprit isn’t a broken meter but the test leads themselves. Even a … Read more

Nothing is more frustrating than watching your ANENG multimeter show a blank screen when you know the probes are touching the wire. A missed connection from the wireless sensor can ruin your readings and waste your time on the job. Most people assume the sensor is broken, but I have found the real culprit is … Read more